Konstruktion

Konstruktion · 25. Februar 2021

The assembly consisted of the following steps: Preparing the aluminium profile elements for assembly by drilling holes in every end and assembling the metal structure Attaching the aluminium LED plate to the roof of 3 shelves: drilling. Welding the aluminium tray into a waterproof reservoir Attaching the fitting and the pipe to the bottom of the tray Cutting and fitting the floor, ceiling, doors, backwall. On every step of the building process we encountered surprises and we had to adjust and...

Konstruktion · 24. Februar 2021

The second stage was designing a model and based on the model selecting the correct construction elements. In the beginning we used the software "Solid Edge" to design our first model. The first model had 1m wide shelves, later we narrowed it down to 0,5m. Using "Solid Edge" was intuitive because we already worked with it previously. Next we started selecting the profile element for the metal structure. Based on the recommendation of the university's technician we chose to use Bosch Rexroth...

Konstruktion · 13. Januar 2021

Hier finden Sie einige Impressionen zum Zusammenbau des Rahmens unseres Hydroponik Systems.